Easy

A guarantee of versatility

The Easy model can be used in different contexts, from smaller to more complex systems. The customer has the option to choose from three available widths (650mm, 810mm, and 1200mm). The operator can adjust the speed of the system up to a maximum of 0.7 m/s, optionally up to 1.2 m/s. 

What applications is it most suitable for?

The Easy model can be used for any type of application, with a length that can reach up to 150 meters.

Technical Features

St. Moritz - Svizzera

Command Column and Touchscreen

The conveyor belt is controlled by a 3.5″ touchscreen, installed on the command column, from which the operator can easily manage the system’s functionalities. From the main page, it is possible to view the amperage and temperature of the motor, change the operating speed, locate an error, and view data related to the number of passes and hours of use.

The software

The main functions and features

Additional Options

Customize your conveyor belt

In addition to the basic model, a series of additional elements can be selected by the customer, in order to create an even more performing and personalized product. They can be requested directly when ordering or added as an integration at a later time.

Automatic restart

This system allows the conveyor belt to automatically restart after a temporary stop.

Automatic Start

The automatic start system allows for working in ‘Energy Save’ mode. It will be possible to stop or reduce the speed of the conveyor belt and then resume operation at the preset operating speed as soon as a customer reaches the boarding area.

Automatic pump

Once the pressure at which the belt should be tensioned is set, depending on the load on the belt and the outside temperature, the pump automatically increases or decreases the pressure, always keeping it constant.

Camera system

A camera system can be installed for the surveillance of the conveyor belt. This system proves to be extremely useful in order to control the belt without the help of an operator, thus saving the cost of personnel.

Rotating brush

A rotating brush can be installed under the drive roller and cleans the surface of the belt from any snow that accumulates. The brush is also important in case of summer use to clean the belt from dirt and mud. In this special configuration, in addition to the brush, a tube with nozzles that spray water on the surface of the belt is installed, making washing easier.

Secondary touchscreen

A secondary touchscreen allows controlling the carpet from another point of command, allowing to perform the same operations as the main touchscreen, without the need to dedicate an operator exclusively to its control.
The use of a secondary touchscreen is subject to the installation of a camera system.

Additional platform

It allows increasing the lateral walkways. It can be installed on the right, left, or on both sides of the conveyor belt, with a variable width.

Pacer

It serves to pace the ascent on the conveyor belt and is recommended on belts longer than 150m to respect the minimum distance between users.