Chair Lift Belt
For chairlifts with fixed or automatic damping
The loading belts can be installed on any type of new or existing chairlift construction. They are produced for both fixed and automatic damping chairlifts, and for chairs with 2 to 8 seats.
Our product is also available with a lift system to make it easier for children to sit on the chairs.
Advantages of installation
- Greater comfort for skiers
- Increased safety during loading
- Increased hourly capacity of the chairlift
- Reduction of personnel required in the loading area
- Reduction of the number of stops and slowdowns
Chairlift with fixed damping
- Maximum speed of 3,3 ft/s
- Maximum structure height of 19,8"
- Available for 2-3-4-6 seat chairlifts
- Chain advancement system with trees and pinions
- Chain tensioning system with two mechanical jacks connected to each other in order to tension both chains evenly
- The surface of the belt is interspersed with rubber and plastic slats
- Easy connection between the motor and the traction shaft to facilitate disassembly if necessary
Chairlift with automatic damping
- Maximum speed of 3,3 ft/s
- Maximum structure height of 19,8"
- Available for 4-6-8 seat chairlifts
- Chain advancement system with trees and pinions
- Chain tensioning system with two mechanical jacks connected to each other in order to tension both chains evenly
- The surface of the belt is composed of rubber slats
- Easy connection between the motor and the traction shaft to facilitate disassembly if necessary
Additional Options
Gates
Made in stainless steel, fully customizable, and equipped with full LED lighting. Gates can be opened individually or simultaneously.
Side Covers
Resin-coated wood side covers with anti-slip material. The covers are attached to the machine and equipped with a special opening lock.
Lifting system
Specially designed for children under 47″ tall, this system offers several advantages in terms of increased hourly capacity of the chairlift resulting from fewer slowdowns of the system and lower operating costs due to a reduced need for personnel to assist with loading operations. The lifting of the belt allows easy seating for children, who no longer require the assistance of the loading personnel or any slowdowns. The lifting of the belt can be manually operated by the operator or can occur automatically. Laser measurement devices are installed near the access gates, allowing the loading belt to automatically activate the lift if a person less than 47″ tall is entering the system.
